About us
Contact us



Fields of application : Lubricant for spinning raw white and dyed WO and synthetic fibres and their mixtures
Composition : Fatty acid polyglycol ester,amid oxethylate
Appearance : Yellow liquid
Concentration : Approx 92%
Ionic state : Non-Ionic 
PH –value  : Approx. 8
Viscosity ( 25 °C) : Approx. 130 mPa.s
Solubility : In cold water
Stability : Stable to hard water, acids and alkaline solutions in usual concentration
Storage stability : Approx. 12 months after delivery , if stored in closed container drums under stated conditions  
Storage conditions :Recommended storage temperature :+3°C to +35°C
 Resistant to frost
Packing : Drum , container 
Washability : In Water:

Rissan 100 gives the fibers excellent antistatic properties. This Iubricant imparts to the fibre a low dynamic and a high static fibre to fiber friction. The fibres are given a pleasantly soft, slightly scroopy handle.

The quantities to be applied depend on the mechanical equipment and climatical conditions in the spinning mill and on the moisture content of the goods. Therefore, the quantities suggested in the following are only standard values which have to be slightly modified from case to case.

1. In worsted spinning:
1.1. Lubrication in the combing section:

a) Wool:          0.4 -0.8 % Rissan 100 approx 12.0 % Water

b) Synthetics:     0.3 -0.5 % Rissan 100 approx 7.0 % Water

1.2. Lubrication in the backwasher.

0.2 -0.3 % active matter Rissan 100

1.3. Lubrication on the drawing frame / mixer;

a) Wool:          0.1 -0.3 % Rissan 100 approx 2.0 % Water

b) Synthetics:     0.1 -0.2 % Rissan 100 approx 1.0 % Water

Please find all the additional information on product properties pertaining to environmental protection as well as working safety on our separate standard safety data sheet.
data are derived from practical experience and can - due to different plant conditions - only serve as recommendations without any liability. Any exciting Industrial patent rights have to respected.