IRAN DANTEX CHEMICALS
Home
About us
Contact us
Products

SPIN FINISH 2001 P

 

Fields of application : Spin finish for the production of PES staple fibers and PES filaments
 OE-rotor low dtex fein type
Composition : Fatty acid polyglycol ester in mixture with phosphoric acid and additives
Appearnce at 20 °C : Yellow liquid
Active content : Approx 79%
Ionic state : Anionic 
PH –value (10% solution ) : Approx. 7.0
Density ( 25 °C) : Approx.1.0 g/cm3
Viscosity ( 25 °C) : Approx. 200 mPa.s
Solubility : Excellently soluble in cold demineralized water
Dilution procedure : SPIN FINISH 2001 P is dissolved in water at 20-30°C by careful stirring
Concentration of solution : Depending on production conditions the concentration should be:
  For staple fibers :        2-20% active solutions
  For BCF/CF yarns :     15-20%
Spin finish add-on : 0.3-0.5 % for PP textile filaments / geotextiles
  0.4-0.6 % for carpet fibers
  0.6-1.2 % for PA 6 and PP-BCF yarns
  0.6-1.2 % for PP-CF yarns
  0.8-1.2 % for PP-LOY/POY/DTY
  0.6-1.2 % for PES staple fibers

Please find all the additional information on product properties pertaining to environmental protection as well as working safety on our separate standard safety data sheet.

These data are derived from practical experience and can - due to different plant conditions - only serve as recommendations without any liability. Any existing Industrial patent rights have to be respected.