||: Bio - eliminable
coning oil for undyed PES and PA filament yarns
||: Ester products
with emulsifiers, antistatics and additives
||: Slightly yellow liquid ,at
|PH –value (10%
||: Approx. 8
||: Approx.0.9 g/cm3
|Viscosity ( 20 °C)
||: Approx. 23 mPa.s
||: Emulsifiable in water
||: Above 120°C
||: Approx. 12 months
after delivery , if stored in the original unopened drums under the stated
storage temperature :+10°
C to +35°C
the product becomes turbid; after heating to 20°-30°C
it is clear again and usable
||: Drum , container tank car
Approx, 75% STRECHOIL 100 are already removed by prerinsing the oiled material
in cold water without addition of surfactants. The rest can be removed by usual
washing. The washing temperature should not exceed 50 °C.
STRECHOIL 100) has adequate antistatic properties.
The suitability STRECHOIL 100 for dyed yarns is limited. Preliminary trials
are necessary. The impairment of colour fastness increases with the amount of oil
STRECHOIL 100 can be applied undiluted according to the usual methods, e.g.
by rollers, spraying, manual lubrication or by porous sintered ceramic pins.
Recommended oil charge:
find all the additional information on product properties pertaining to
environmental protection as well as working safety on our separate standard
safety data sheet.
0.8 - 2.0% STRECHOIL 100
These data are derived from practical
experience and can - due to different plant conditions - only serve as
recommendations without any liability. Any exciting Industrial patent rights
have to respected.